Post your specs and plugin config.

 

i've setted all like in the guide that we can find in the site of pcsx2...
is there an official thread for kingdom hearts?

 

Sounds like you've got very old computer especially gfx card if colors are wrong etc, Kingdom Hearts works fine if your specs are up to date.

Welcome to RPGWiZaRD's Putfile.com section

 

I have:
2Gbit RAM Crucial Ballistix
Interl Core 2 duo
nvidia 7950gx2
and i don't remember nothign more but it's enough for play...

I tell you my plugin, maybe there's something wrong!
Graphics:Gsdx9 (1280X1024 60Hz - Renderer Direct3D - Shader Pixel Shader 3.0 - Enable palettized textures)
Sound.E.Pp.S. SPU2 Sound Driver 1.6.0
Cdvdrom: Linuzapps Iso CDVD Driver 0.5.0
Usb: USBnull Driver 0.4.0
Fist Controller: SSSPSX PAD Plugin 1.7.0
Bios: Europe v02.00 (14/06/2004) Console
And CPU: Frame limiting: Normal

So?? What should I do?
i want playyyyyyyyyyy

 

use zerogs graphic plugin


with gsdx9 i get 22 fps in intro with zerogs 60

 

Yea switch to ZeroGS 0.96.0 and make sure MTGS and dual core mode is enabled in cpu settings and it should work just fine.

 

i haven't the problem of the frame but the texture errors, the missing chat test! What can i do? pleeeeeeeeeeeease!

 

i haven't the problem of the frame but the texture errors, the missing chat test! What can i do? pleeeeeeeeeeeease!

So did you do what I suggested in the last post, switch to ZeroGS plugin instead of GSdx9 as GSdx9 doesn't display the text correctly unless using software float which is really slow.

 

So did you do what I suggested in the last post, switch to ZeroGS plugin instead of GSdx9 as GSdx9 doesn't display the text correctly unless using software float which is really slow.

Thank you!!!! this work very good!!!!!!!!!
But 've got a final problem
i tried to move my character but he go only to left and right, not up and down...
i'm using SSSPSX with a joypad..
i don't know why with keyboard it doesn't move in any direction... have you some idea?
Thx for help

 

Use TwinPad Keyboard plugin instead of others, u can find it here on forum, just use search function ;oP. And before u ask the real last question about looping game near ingame cutscene with Sora's eye, u can pass this when u try to check thread or/and irq setting in SPU plugin from Pete. When u pass this cutscene, it's in tutorial after first battle with shadow boss, u can uncheck thread and irq checkbox again, u don't need it anymore. And when u want to improve speeds, just use non VM emulator version (pcsx2t.exe), it can run game significantly faster than VM one, or u can use patch for VM version which makes game fast the same like with non VM version, patch u can find here on forum as well in sticky thread about patches .

 

Use TwinPad Keyboard plugin

I downloaded it from the forum, I installed it in PCSX\plugins and i controlled if I've got MSCOMCTL.OCX but when i start PCSX2 and I go to configure it doesn't notice that plugin it notice only SSSPSX PAD and PADwinKeyb (and they give me a lot of errors!)...
what now?

 

When configuring SSXPAD, do not press the analog stick at 'analog' thing, but but condigure the LX, LY, RX and RY like this:
1. When configuring the LX, push the left analog stick to right or left.
2. When configuring the LY, push the left analog stick to up or down.
3. When configuring the RX, push the right analog stick to right or left.
4. When configuring the RY, push the right analog stick to up or down.

Now try with that, and should work. Enjoy.

 

I downloaded it from the forum, I installed it in PCSX\plugins and i controlled if I've got MSCOMCTL.OCX but when i start PCSX2 and I go to configure it doesn't notice that plugin it notice only SSSPSX PAD and PADwinKeyb (and they give me a lot of errors!)...
what now?

oh sorry! i'm wronged with a file, now is all ok!!!!
thanks^^

when i said many problem i intended really many!
i've got 1 other.... i have always 20-60 fps but i don't know why in some scene it slow down (even if i have 20-30 fps), whereas in other it goes faster then normal...
there's a solution?

 

are you using the vm or the tlb build??
also, be sure, that you enabled mtgs and dc mode in CPU

 

oh sorry! i'm wronged with a file, now is all ok!!!!
thanks^^

when i said many problem i intended really many!
i've got 1 other.... i have always 20-60 fps but i don't know why in some scene it slow down (even if i have 20-30 fps), whereas in other it goes faster then normal...
there's a solution?

What's most slow is ingame cutscene when u can see objects/scene further from focused object/char is blured - this effect slow down a lot, but u can't fix it. What u can fix is check settings of zerogs plugin and make sure u have not checked billinear filtering and AA. This can slow down a lot too when some effects in game appears, many explosions or waterfall at first island and so.
I repeat again u can speed up game when u use non VM exe or use patch for VM exe version of emulator and of course what zeldafan mentioned as well u have to check DC and MTGS options in CPU settings which allows emu to use botch cores of your processor.
For example I have AMD X2 4.6 and GF6800 and I'm having ~50fps. If i'm not counting cutscenes, so ingame when many enemies appear and many explosions initiated, I'm getting like 30fps what is still pretty playable.
In cutscenes I have like 10-30fps depends on how much blur I can see .
But ingame 40-fullspeed what's pretty playable, also make sure to check frame limit, coz in some cases u can get like 80fps ingame which is faster than it should be ;P.

 

similar problems

i'm also on kh1, but am only getting under 10 fps, and haven't even gotten into the game yet, my specs are

amd 64 turion
it looks like 894 MB of ram
ati radion express

 

I had activated the core in cpu settings but the problem still go on...
it's not a problem of fps! i've got always more then 20-30 fps, too when the game slow down, too when it goes faster! the frame are ok.... i don't know the reason of this problem because i have many fps
Some idea?

p.s. how can i check if i have VM?

here i post all my configuration, so if you find some problem maybe you can help me:
here you can see my general comfiguration and graphical config
here you can see my cpu settings and a particular errore that it gives me could not load file...

is this all right?
thanks for the help that all gave me

 

I had activated the core in cpu settings but the problem still go on...
it's not a problem of fps! i've got always more then 20-30 fps, too when the game slow down, too when it goes faster! the frame are ok.... i don't know the reason of this problem because i have many fps
Some idea?

p.s. how can i check if i have VM?

here i post all my configuration, so if you find some problem maybe you can help me:
here you can see my general comfiguration and graphical config
here you can see my cpu settings and a particular errore that it gives me could not load file...

is this all right?
thanks for the help that all gave me

Maybe I don't understand what's your problem, it's that sometimes FPS is too high = game is faster that it should be ? If it is, just use Frame Limit, second option in Frame Limiting in CPU settings and it will run like 50 or 60 fps depends on which version PAL/NTSC u havea nd not faster.
And u can check which emu u running in title of application where will be wrote like PCSX2 0.9.2 Watermoose - VM. And VM means it's VM, in other case there will be non VM. If u look into emu directory, u can see two exe files where pcsx2.exe = VM and pcsx2t.exe = non VM. If u need more FPS try to use non VM.

 

i tried with non vm version but i noticed that sometimes i have 25-30 frame and in those moment the game slow down... is normal? is there a solution?

 

I downloaded it from the forum, I installed it in PCSX\plugins and i controlled if I've got MSCOMCTL.OCX but when i start PCSX2 and I go to configure it doesn't notice that plugin it notice only SSSPSX PAD and PADwinKeyb (and they give me a lot of errors!)...
what now?

I have problem with Twin Pad Plugin too. I begun playing Resident Evil 4, and i can not shoot the monsters. I can move my character with the keyboard, (i dont need joystik any more!( but i can not shoot. Why?

 

i tried with non vm version but i noticed that sometimes i have 25-30 frame and in those moment the game slow down... is normal? is there a solution?

Well 25fps is half a speed of normal so yes, it is normal that game seems to be slow at 25fps and solution I wrote already and u should have 30-full speed (50/60) fps in game with your computer. Only cut scenes can be slower like 10-20fps or FMVs, but this one I wrote as well. If u use non lastes VM emu and plugins, DS+MTGS and SSE zerogs plugin without billinear filtering and AA, u should have this game playable like I have.

 

Can someone help me please? How can i shoot the monsters in RE 4? I can move my character with the keyboard using Twin pad plugin bu i can not shoot. Please help me!

 

i tried with non vm version but i noticed that sometimes i have 25-30 frame and in those moment the game slow down... is normal? is there a solution?

No, sometime in game if u see some special effects or many enemies, u can have game this slow, but it's occasionally, most of the time u should have around full speed in game.

 

No, sometime in game if u see some special effects or many enemies, u can have game this slow, but it's occasionally, most of the time u should have around full speed in game.

thx...
i tried without aa filtring but the graphic is horrible.. i can't play with that graphic!
i think that i've some particular problem because with my computer it should go perfect (if there are some computer with 1GB ram and old graphic card that play this game)...
And I have 1 other question: does the computer (with 1gb ram.....) play with slow down with 20fps?

sorry for my mistakes!

 

Yea switch to ZeroGS 0.96.0 and make sure MTGS and dual core mode is enabled in cpu settings and it should work just fine.

Where do I go to enable MTGS and dual core mode? Sry, new at this