Next Generation Emulation banner
361 - 380 of 1,358 Posts
Nope. I take that it must be bootable? Perhaps an hdd partition might work but I've already made the iso and no data left to spare. I was hoping to squeeze the image enough for a dvd. I don't know why I downloaded x86 save for machines I might be installing it on needing x86 for whatever reason. I think traditional genuine Windows media is either x86 or x64 flavor and not both on the same dvd?
 
Why not just leave it on your harddrive until you can burn an image? Better yet, link the new computer to the one with the image and install it from your harddrive.
 
I'll see if my father has an 8+ GB usb drive. Other computers are outside the house and I looked into installing over a network but don't want to be bothered with that. I am connected to my parents wifi from my home behind them, not a stable connection to try installing an OS from.
 
I copied the files over, made the partition bootable and ran the setup from the partition within windows. I have to have some kind of bootloader to boot into it from outside Windows. Anyways the install ended up restoring my previous version of Windows with some error along the lines of failing first boot phase. Apparently I can't clean install without upgrading my existing Windows 7 install first.

I then tried to split the x86 and x64 files from the image so I could burn to DVD. Apparently I did something wrong there because the image/dvd was broken and the install could not continue.
 
Man you always go for the difficult route... xd

An external hdd or usb stick would be your best bet.

I have a 500gb external drive, 2 partitions, one with 60+gb and the other data.

Made the small partition bootable and installed windows 10 from there.
 
I have an external drive that I need to find the cables for. I tried to run the setup last night from within windows and upgrade. Apparently I have to upgrade my Windows 7 install before I can clean install as I do not have a product key. I did so last night but it ended up reverting back to Windows 7 with this error:

The installation was not successful. In the FIRST_BOOT phase an error occurred during the MIGRATE_DATA process.
 
Discussion starter · #369 ·
Updated Satty to Win10. Brightness control from the Action Center doesn't work. But having text input automatically switch to hand-writing when I have my stylus out is brilliant, hats off for that.
 
Tried a completely clean install, this time even wiping the system partition beforehand AND shutting down the pc before it, and it still activated instantly (no MS account either); in other words it doesn't need information from your previous installation either AFTER you activated it once. Pretty cool.
 
^ It may take activation information from a "repair" partition. I know in when I install Windows 7 it creates a small 100MB partition. It could activate based on hardware id too. The id was registered with Microsoft servers so when you re-install it auto-activates.
 
I had removed all the partitions on the primary disk. The only ones still there were on my secondary drive, which contains data, no system files (although it could still store something on there of course). I think it activates based on the hardware, or it just uses multiple references. Anyway, it works well.
 
^ It may take activation information from a "repair" partition. I know in when I install Windows 7 it creates a small 100MB partition. It could activate based on hardware id too. The id was registered with Microsoft servers so when you re-install it auto-activates.
No that is not a repair partition but simply a boot partition, it has nothing to do with harddrives its based on your mobo's ID.
 
And then there is this http://www.destructoid.com/windows-10-has-killed-securom-and-safedisc-drm-306674.phtml Microsoft are just asking people to run cracked games now.

And potentially a load of games with it

Back in the days before Steam, Origin, or uPlay, the infamous SecuROM and SafeDisc were two of the primary types of DRM developers could use. In the name of “preventing piracy” (read as “preventing perceived lost profits because of second hand sales” if you want), the software would get right into your system, requiring way more permissions than they really should have needed.

For Windows 10, this deep embedding SecuROM and SafeDisc used is no longer allowed. According to Microsoft’s Boris Schneider-Johne, it’s due to their massive security loopholes they pose, and that they haven’t been updated to Windows 10’s standards. Courtesy of Rock Paper Shotgun, we have a translation:

Everything that ran in Windows 7 should also run in Windows 10. There are just two silly exceptions: antivirus software and stuff that’s deeply embedded into the system needs updating – but the developers are on it already – and then there are old games on CD-Rom that have DRM. This DRM stuff is also deeply embedded in your system, and that’s where Windows 10 says “sorry, we cannot allow that, because that would be a possible loophole for computer viruses.” That’s why there are a couple of games from 2003-2008 with Securom, etc. that simply don’t run without a no-CD patch or some such. We can just not support that if it’s a possible danger for our users. There are a couple of patches from developers already, and there is stuff like GOG where you’ll find versions of those games that work.

On the one hand, this is a good move. SecuROM and SafeDisc always earned the scorn it got from people, due to it being incredibly insecure and at times just didn’t work properly. The fact they’re dead, at least for now, is a good thing.

On the other hand, this means so many older games now just won’t work on Windows 10 – Retail versions of games such as The Sims, Crysis, Mass Effect, BioShock, Grand Theft Auto IV and more use SecuROM. They’ll probably just become unplayable now.

It does feel like we’re potentially losing some actually pretty recent parts of gaming history because of this decision. Either that, or we're thrusting the responsibility of archiving even recent games onto services like GOG, which doesn't feel right to me.

It’s also a concern considering Microsoft’s recent stance on pirated software. We don’t know how this policy will apply to games that have been cracked to remove their DRM, so how are players expected to play the games they paid for if every possible option is blocked?

Windows 10 Won’t Run Games Using SafeDisc Or Securom DRM [Rock Paper Shotgun]
 
Love the fact that Win10 comes with a "3D Builder" app.

Nice to know that when I finish building my 3D printer Win10 will cover my 3D printing needs right out of the box.

Good job Microsoft :thumbsup:
 
After making the jump from xp to both win7 then win10 within the last three weeks I can categorically say I hate the file explorer in both, xp was so much easier for me, in win7/10 the mouse wheel scroll keeps losing focus and switches back to the folders / drive tree instead of staying constantly on the opened current folder to browse files, when I create a new folder it places it right at the end of my files list instead of next to the files i'm currently near that I drag into that new folder.
I also don't know narrow my files search to selected drives in xp you could just put C; D etc
Even paint is rubbish now for simple print screens the menu is cluttered to death, if this what it's like for desktops I hate to think how dreadfull it is for small tablet screens.
 
361 - 380 of 1,358 Posts