I am getting good speed with the zeroGS plugin. ( about 2-3x performance increase over the standard GSdx9). however with games like FFXII, where the GSdx9 works just fine ( except the flickering on and off ), the zero GS locks on FFxII as soon as i tell it to enter the game. also, all the visuals appear interlaced ( during Fmvs ( once you pass the initial menu/ intro to the game ). the GSdx9 plugin seems to be able to go much further into the game. ( too bad its so slow though )

my config has all the fancy stuff turned off ( like multi threading, and im not using SSe2, because it seems to make games work somewhat better. )

im not sure if this helps at all, but thought id post this anyway.

 

Is anyone noticing a slight bouncyness to this plugin? It seems as if its shaking up and down a bit each frame. Other than that though, its a great plugin, getting up to about 30fps in Mushihime sama during gameplay, and only dropping to 10 in the intense scenes (even the normal ps2's lag there). Was wondering if anyone knew how to make the bouncing stop.

 

actually it seems it was the sound plugin that was causing the problems, i just disabled it, and yes i have sse2.

yes for me too

 

I'd buy a new PS2 whenever I get money for it rather than going for a new videocard supporting PS 2.0 costing the same or more money ;P
Anyway its good a new plugin popped in gsdx9 sorta got dead or something

 

With ZeroGS, press F5 to toggle the interlacing. You might have turned it off on accident, so you get bouncing like gsdx. Press F6 to toggle AntiAliasing. If it is off, games go faster.

GeForce 5000 series are known to have problems... there is no support for them for the time being. However, if there are graphics issues with GeForce6000+ or ATI X1000+ cards, you can bug me until it's fixed

 

Burnout revenge

Hello Zerofrog,


Thanks for this great plugin. I´ve been testing several games with it and looks really well, just tell you (in order to be helpful) that when running Burnout Revenge with your plugin the emulator exits, hs doesn´t happen by using gsdx. This would help you to find bugs.

Athlon XP 3200
NVIDIA 6600GT
1Gb RAM

The emulator config is in the doc file.

 

Hi Zero

At first thanks for this great plugin. :thumb:

It's very good looking and "fast" on my machine.

And I wanted to ask why the resolution doesn't change when I go to full screen mode?

Is the resolution fixed? When yes why?

I asked this because it looks not so good @ 1280x1024 (TFT).

Thanks in advance for your answer.

spec:
AMD64 Newcastle 3200+
x800xt 500/500
1Gb Ram

I added a pic for better understanding and a spotlight on pcsx2 (free for all).

 

jesusrp, you are wasting your time.

for one i dont know why you posted a shot of visual studio, you should know that kinda thing isnt supported here.

secondly burnout revenge doesnt work even if zerogs didnt crash so you're wasting your time

 

jesusrp, the game title is enough. I will test and make sure it works next release.
haru, would it be better to have the same resolution that your desktop is currently using? I don't think it'll affect speed at all since it is just stretching and I want to avoid having too many options.

thanks,

 

So I've finally been able to get the emulator up and running well.
I've been having most of the same issues with things in FFX that everyone else has. The menus are running swell, >45 FPS, but the intro sequence runs quite slow, the most I've achieved is about 1.8 FPS? But it does look phenomenal, I must say. Swell swell work guys.


Specs:
Well, my GFX card I believe plays a major role in my speed issues, I'm running a GeForceFX 5600XT. I know you mentioned the 5000 line isn't supported, but I came up with some peculiar happenings while running the emu with it. Pretty much everything would run correctly but at a much slower pace. And also, I don't believe my card has any kind of Pixel Shader 2.0 support, but it runs that setting with the GSDX9 plug like it's nothing and also I have no problems running ZeroGS with it (except for a slight speed decrease beyond what GSDX9 was giving me.) I don't know exactly what contributes to it, but nevertheless things aren't moving too fast. I'm looking to upgrade my card soon, though, probably an ATI card for a change. Would any of you recommend an ATI over an nVidia chipset, one way or the other?

 

jesusrp, you are wasting your time.

for one i dont know why you posted a shot of visual studio, you should know that kinda thing isnt supported here.

secondly burnout revenge doesnt work even if zerogs didnt crash so you're wasting your time

I just tried to be helpful and give as much relevant data as possible, just to help Zerofrog to identify the bug, nothing else. And maybe any of theese screenshots would give him the clue. I was trying nothing but help him.

 

As I see zeroGS requirement is high(Geforce 6XXX/ATI X1XXX). can it being optimize with SSE3? Also, no source code available yet?

 

I´m sure you already know it but I´ll post in any case nobody told you yet
FSAA doesnt like videos X)

 

I have a Geforce 6200. And im getting this error:
******
GS ERROR: Device doesn't support alpha blending for 16bit floating point targets.
Quality will reduce.
*********

 

jesusrp, you are wasting your time.

for one i dont know why you posted a shot of visual studio, you should know that kinda thing isnt supported here.

You got him wrong.
Look closely: it's just DEBUGGING of the pcsx2 crash. It was not colpiled by him. So I guess it has to be supported since it's OFFICIAL build.

 

Hi pals!
PCSX2 team it's very cool!!


I guess keeping going on to develop such emulator must be a hard work!:???:

But I have just a thing to complain... why you haven't implemented a GS graphic plugin to play with pixel shader 1.4?

There are so many users who cannot upgrade their pc, then in my opinion it would great let the player choose if he want use powerful advanced plugin or a standard one like that.

Thanx anyone

 

Hi pals!
PCSX2 team it's very cool!!


I guess keeping going on to develop such emulator must be a hard work!:???:

But I have just a thing to complain... why you haven't implemented a GS graphic plugin to play with pixel shader 1.4?

There are so many users who cannot upgrade their pc, then in my opinion it would great let the player choose if he want use powerful advanced plugin or a standard one like that.

Thanx anyone

GSDX9 is able to use PS 1.4, just configure it to do so.

 

zerofrog i was testing mostly 2d beat em ups and found one strange instance of when trying street fighter anniversary edition with sf3 third strike and when using direct 3d mode using gdsx. It shows the beginning textures i.e choose wat game then some text about saving to mem card then u cant see anything but i can hear the game. So i tired it in software mode and it showed everything, the zerogs does not work, so wat is it about the software mode in the gdsx plugin so that it shows all of the textures if i choose direct3d everything is black and i can hear the game running?

 

what's your video card?

 

@Zerofrog
I get the error "Can´t open GS plugin" ...
Ive got
MMX, SSE,SSE2,SSE3 and PS 2.0 so that cant be the problem...
i tried a lot ... but it still isnt working for me...

 

Thanx GeneralPlot to answer!
I use gsdx0.9 I got P4 2.6 ghz and mobility radeon 9000 1GB ram, but when I test the plugin it tells me ok on pixel shader, but error separate alpha blend, source blend factor, and error destination blend factor. The old gsdx worked with my pc If I ignore this and try to launch a game I got a popup telling that My pc support pixel shader 1.4 and I selected 2.0....:???:

Sorry where I selected?:hdbash: there's no option to selected it

Thanx in advance

 

Yunchen: can you send gsLog.txt? If it ever fails, it could probably be that you are low on video mem?

Vampirexx: dude, this is a zerogs thread.. give me a break

 

Thanx GeneralPlot to answer!
I use gsdx0.9 I got P4 2.6 ghz and mobility radeon 9000 1GB ram, but when I test the plugin it tells me ok on pixel shader, but error separate alpha blend, source blend factor, and error destination blend factor. The old gsdx worked with my pc If I ignore this and try to launch a game I got a popup telling that My pc support pixel shader 1.4 and I selected 2.0....:???:

Sorry where I selected?:hdbash: there's no option to selected it

Thanx in advance

Not sure how you managed to miss it. See screenshot for it. And yes, if you have any further issues that are not related to ZeroGS, make a post in the forums, and not in the ZeroGS thread.

 

Hi zerofrog!
I have GeCube Radeon 9600XT EE(PS2.0) and Athlon 2600+(Barton, SSE).
Your standart plugin don't work
Log:

******
GS WARNING: Need independent write masks! Some z buffer effects might look bad
*********
******
GS WARNING: Need MRT Post Pixel Shader Blending. Effects will look bad
*********
******
GS ERROR: Device doesn't support alpha blending for 16bit floating point targets.
Quality will reduce.
*********
Creating effects
Creating extra effects
\programming\ps2dev\pcsx2\ZeroGS\zerogs.cpp:1232: D3DXCompileShaderFromFile(EFFECT_NAME, NULL, NULL, "RegularVS", "vs_2_0", ShaderFlagsVS, &pShader, &pError, NULL) (88760b59)
\programming\ps2dev\pcsx2\ZeroGS\zerogs.cpp:842: LoadExtraEffects() (88760b59)

 

Ok I made pcsx2 work changin some cpu setting and pixel shader!
Thanx GeneralPlot!!
Sorry Zerofrog to bother:innocent:
Please have a little patience for newbies:thumb: