Next Generation Emulation banner

1 - 3 of 3 Posts

·
AKA snkmad
Joined
·
4,030 Posts
Discussion Starter #1
I didnt work here. All i got is a black screen. Ive tried pete soft plugin, but it quits back to windows. The pete 3d plugin works just fine, fps going around 40~45. Thats why i wanna know whats wrong with lewpys... Ive tried 1.32 and 1.33. Heres my info:

Lewpy's Glide³ Plugin Configuration Information v1.33
-----------------------------------------------------

Computer Information
OS : Microsoft Windows 98 SE (v4.10 Build 2222)
DirectX : DirectX 7 installed
Processor : AMD AMD-K6(tm) 3D processor, 501Mhz (1 off) (00/058c)
32kb L1-I, 32kb L1-D, 0kb L2 (on-chip)
Memory : 128Mb

Core Emulator
ePSXe : D:\JOGOS\EPSXE1.20\EPSXE.EXE
: 07/03/2001 22:50, 148480 bytes

*------*----------------------*---------*------------------*
| Type | Name | Version | Date |
*------*----------------------*---------*------------------*
| BIOS | SCPH1001.BIN | | 11/07/1997 05:38 |
| CDR | W9XCDRCORE | 0.0 | Plugin Not Found |
| GPU | gpuLewGlide.dll | 1.33 | 06/05/2001 17:47 |
| SPU | SPUCORE | 0.0 | Plugin Not Found |
*------*----------------------*---------*------------------*

*-----------------------------*---------------------*
| ePSXe Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Sound Enabled | Yes |
| CDDA Enabled | Yes |
| XA Enabled | Yes |
| XA Read Enabled | Yes |
| SPU IRQ Hack | No |
| CDROM Drive Letter | E |
| CDROM Accurate Timing | No |
| Disable CDROM Status | No |
| Disable CDROM RT Status | No |
| MDEC Enabled | Yes |
| MDEC Timing Enabled | No |
| SIO IRQ Always Enabled | No |
| Country | PAL |
*-----------------------------*---------------------*

Glide³
Board : Voodoo3 (tm)
Version : 3.10.00.0658
File : C:\WINDOWS\SYSTEM\glide3x.dll
: 02/11/2000 12:32, 329728 bytes

*-----------------------------*---------------------*
| Plugin Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Active Configuration | 1 |
| Active 3dfx Card | 1 |
| Enable HotKeys | No |
| Resolution | 640x480 |
| Refresh Rate | 60Hz |
| Emulate MASK Bit | Yes |
| Dynamic Texture Caching | Yes |
| Custom FrameCap | 60Hz |
| On-Screen Display | FPS |
| Frame Skip | Disabled |
| FrameRate Limit | Custom |
| System Type | NTSC |
| FrameCap Method | Hybrid |
| Draw Method | Bright |
| Alpha Blending Mode | Advanced |
| Bilinear Filtering | Enabled |
| Alpha Testing | Normal |
| FrameBuffer Access | Write |
| Off-Screen Drawing | Basic |
| Polygon Mode | Textured |
| Texture Windows | Enabled |
| VSync | Disabled |
| Banshee Code | Disabled |
| MDEC Format | Texture |
| Experimental Flipping | On |
| Experimental Screen Sizing | On |
| FrontBuffer Rendering Fix | On |
| FF7 TextureWindow Fix | Off |
| DMAChain Fix | Long |
*-----------------------------*---------------------*
 

·
Registered
Joined
·
56 Posts
CDDA Enabled - Yes
XA Enabled - Yes
XA Read Enabled - Yes
- for the above try disabling them

SPU IRQ Hack - No
- try enabled

MDEC Timing Enabled - No
- should be enabled

SIO IRQ Always Enabled - No
- TRY ENABLED (or hit F4 while in game)

Country - PAL
- Why PAL while Lewpy is set to NTSC??

Emulate MASK Bit - Yes
- May or may not be required. i dunno.

System Type - NTSC
- ??

FrameCap Method - Hybrid
Experimental Flipping - On
Experimental Screen Sizing - On
FrontBuffer Rendering Fix - On
- for these you should read the lewpys readme... or don't you understand it? if not, post what you don't understand and we'll help you.

I don't have the game so maybe someone who has it can help. It's possible that the game simply doesn't work. these are just general suggestions that apply to every game w/ lewpy's plugin. hope this helps.
 

·
Registered
Joined
·
27 Posts
Hey, are you able to see the first 2 FMV (Activision and Paradox) ?
If so, just press F4 when you see the black screen. X-men: MA checks on your memory card to load a game and the SIO IRQ needs to be enabled.

Bye
 
1 - 3 of 3 Posts
Top