Next Generation Emulation banner

1 - 6 of 6 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
Hi, sorry my english is not very good.

i have a big problem whit my motherboard, my mobo is a MSI KT6V (MS-7021), i flashed whit a wrong bios, a bios of other mobo.

i founded the right bios after i had flashed it, when i tried to flashed again, (cause the board was all crazy), it didn't let me, it doesn't let me!!, the bios doesn't have any option of write protection. I really need to flash the right bios,
what can i do.
 

·
War Games coder
Joined
·
1,926 Posts
You've done screwed up bad. OK, you have two options. Your cheapest and most convenient bet (though also most unlikely) is to use a chip-burning tool to re-flash your BIOS without your mobo... but not many people have access to these. Next best bet is to tell your mobo manufacturer all about it, wait for them to stop rolling around on the floor, and send in your BIOS chip to have them re-flash it or replace it... but this is more costly and time consuming.

The problem is your BIOS holds information on how to use your mobo... including how to access your floppy drive (which is how you're likely trying to update). If it's inconsistent with your hardware, you're pretty much screwed.
 

·
Registered
Joined
·
496 Posts
Motherboards, these days, usually come with the default BIOS on CD. If you have one, you can follow whatever instructions that there are, and have it load the default bios. I know mine came with one, so hopefully yours is new enough as well.
- Modem
 

·
War Games coder
Joined
·
1,926 Posts
That all assumes that the BIOS is completely malfunctioning. You cannot load a BIOS on a computer with a partially functional BIOS if it passes its own self-checks (as it sounds like it is doing). If you could non-destructively convince the machine that the BIOS is completely borked it may have a backup BIOS (I've seen some with a backup chip) or a failsafe that only allows floppy access (just good enough to re-flash)... though I don't know how you'd do that.

I used to have a BIOS that had the failsafe in it - somehow my BIOS was completely borked, but it gave me a prompt and access to the floppy drive (no boot disk) and I re-flashed the BIOS from there and recovered. The trick is to let the machine know it's borked.
 

·
Heh...
Joined
·
1,905 Posts
This happened to me before. My mobo is a NF7-S rev 2 mobo and I flashed it with a NF7-S2 bios and I had to order a bios chip to replace the messed up one. I don't know if you can do that though. :heh:
 
1 - 6 of 6 Posts
Top