Next Generation Emulation banner

1 - 11 of 11 Posts
B

·
Guest
Joined
·
0 Posts
Discussion Starter #1
ok i am wondering how you are able to use 2 gamepads at one time on the same cpu (like playing against someone on a emulator) i know their has to be a way to do it cause you can add more than one controller in the control panel.i have one that connects to usb and the other the standard gameport but it only detects the usb controller. (btw i already tried restarting it didnt help) any help will be appreciated
 

·
Registered
Joined
·
1,238 Posts
The usb is plug n play and the other isn t. That s why the comp doesn t detect it.

Go to configuration pannel>Gaming options>then click on "add"
choose ur joypad type (if u have for example a 6 butons joypad then select this type...).

To calibrate and check if it works, click properies and do as it s shown.
Hope that ll help.

Bye
 
B

·
Guest
Joined
·
0 Posts
Discussion Starter #3
i can add it but since it says "not connected" i cant enter properties to calibrate it or anything.
 

·
Registered
Joined
·
1,238 Posts
Don t u have a driver or somthg like that? (Manuals...etc)
Try to put off ur usb pad or change the controller id from 1 to 2of ur usb pad.
 
B

·
Guest
Joined
·
0 Posts
Discussion Starter #6
the one that cant be detected is a generic 4-button gamepad.it does work though because i was using it before i got my new gravis gamepad. so they should both work but they dont.
 
B

·
Guest
Joined
·
0 Posts
Discussion Starter #7
sorry for double-post but forgot to add something. the manuals didnt have any answers that might work and when i try to change the id of either gamepad it says this destination is occupied.
 

·
Registered
Joined
·
1,238 Posts
Disconnect the new gamepad (the gravis) and try to do as I said before W/ ur "old" gamepad. It should work if it worked b4.
Then, change the controller id of the old to "2" or another number but not the first.
Then install ur new gravis pad (since it s usb there should be no pb.) and put the gravis ' id to "1"

See ya
 

·
Registered
Joined
·
1,238 Posts
Originally posted by bahamut_2006
sorry for double-post but forgot to add something. the manuals didnt have any answers that might work and when i try to change the id of either gamepad it says this destination is occupied.
So, ur 2 gamepads are recognized then..
Just do as i said.
 
B

·
Guest
Joined
·
0 Posts
Discussion Starter #10
ok well thx for the help i finally got it working i disconnected both then connected the generic one first
 
1 - 11 of 11 Posts
Top