Next Generation Emulation banner

track and field 2

586 Views 4 Replies 3 Participants Last post by  bluekirby0
i am all new to all thjis but read few posts and got some games to work ff7 ff8 etc but cannot get track and field to work tryed a few setting etc as anyone got this to work (its a iso files with ccd format) and what setting do you use to get it to work any help will be apreachated

this are the settign i use for ff7 etc

amd 2.8 prosesser
nvidia riva tnt 64 card
c media sound card
512 ram

Plugin: Pete's OpenGL Driver 1.76
Author: Pete Bernert
Card vendor: NVIDIA
GFX card: NVIDIA ntn riva 64

- 800x600 Fullscreen/WINDOW MODE - [32 Bit]
- Keep psx aspect ratio: off

- Filtering: 4
- VRam size: AUTO

- FPS limitation: on
- Frame skipping: off
- FPS limit: 200

- Offscreen drawing: 4
- Framebuffer texture: 2
- Alpha multipass: on
- Mask bit: on
- Advanced blending: on

- Scanlines: off
- Line mode: off
- Unfiltered FB: off
- Dithering: off
- Screen smoothing: on
- Full vram: off
See less See more
1 - 2 of 5 Posts
Either use auto for fps limit, or use 60 (59.9) for NTSC games and 50 for PAL...200fps is WAAAaaaaaaay too fast, although your computer prolly isn't playing it that fast.
have you tried out Pete's Soft GPU plugin or the D3D one? Not sure how that card handles D3D compared to OGL but it might be worth a try. Use software settings instead of hardware where you can since you only have 64 MB of VRAM... then turn hardware settings back on one at a time to tweak it and speed it up if you get it running.
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.