Next Generation Emulation banner

1 - 3 of 3 Posts

·
I'm dangerous
Joined
·
533 Posts
Discussion Starter #1
try to enabling the fps, if the fps still working, then the problem in on your renender, if the fps stops responding, the problem is in Pal Ntsc Selection, on ePSXe, not Lewpy, or try to pal on ePSXe, and NTSC On Lewpy
 

·
The Wingman
Joined
·
201 Posts
here's my plugin config:

Lewpy's Glide³ Plugin Configuration Information v1.33
-----------------------------------------------------

Computer Information
OS : Microsoft Windows MEA (v4.90 Build 3000)
DirectX : DirectX 8 or better installed
Processor : Intel Pentium III, 803Mhz (1 off) (00/0686)
16kb L1-I, 16kb L1-D, 256kb L2 (on-chip)
Memory : 128Mb

Core Emulator
ePSXe : C:\WINDOWS\DESKTOP\EPSXE120\EPSXE.EXE
: 07/03/2001 22:50, 148480 bytes

*------*----------------------*---------*------------------*
| Type | Name | Version | Date |
*------*----------------------*---------*------------------*
| BIOS | SCPH1001.BIN | | 11/07/1997 05:38 |
| CDR | W9XCDRCORE | 0.0 | Plugin Not Found |
| GPU | gpuLewGlide.dll | 1.33 | 06/05/2001 17:47 |
| SPU | spuNull2Mixer.dll | 1.4 | 20/04/2001 00:36 |
*------*----------------------*---------*------------------*

*-----------------------------*---------------------*
| ePSXe Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Sound Enabled | Yes |
| CDDA Enabled | Yes |
| XA Enabled | Yes |
| XA Read Enabled | Yes |
| SPU IRQ Hack | Yes |
| CDROM Drive Letter | E |
| CDROM Accurate Timing | No |
| Disable CDROM Status | No |
| Disable CDROM RT Status | No |
| MDEC Enabled | Yes |
| MDEC Timing Enabled | Yes |
| SIO IRQ Always Enabled | No |
| Country | PAL |
*-----------------------------*---------------------*

Glide³
Board : Voodoo3 (tm)
Version : 3.10.00.0674
File : C:\WINDOWS\SYSTEM\glide3x.dll
: 16/01/2001 12:38, 348160 bytes

*-----------------------------*---------------------*
| Plugin Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Active Configuration | 1 |
| Active 3dfx Card | 1 |
| Enable HotKeys | No |
| Resolution | 640x480 |
| Refresh Rate | 85Hz |
| Emulate MASK Bit | Yes |
| Dynamic Texture Caching | Yes |
| Custom FrameCap | 100Hz |
| On-Screen Display | Off |
| Frame Skip | Disabled |
| FrameRate Limit | Auto |
| System Type | PAL |
| FrameCap Method | New |
| Draw Method | MultiPass |
| Alpha Blending Mode | Advanced |
| Bilinear Filtering | Enabled |
| Alpha Testing | Normal |
| FrameBuffer Access | Write |
| Off-Screen Drawing | Extra |
| Polygon Mode | Textured |
| Texture Windows | Enabled |
| VSync | Enabled |
| Banshee Code | Disabled |
| MDEC Format | Texture |
| Experimental Flipping | Off |
| Experimental Screen Sizing | Off |
| FrontBuffer Rendering Fix | Off |
| FF7 TextureWindow Fix | Off |
| DMAChain Fix | Long |
*-----------------------------*---------------------*

:(
i am trying to play resident evil 2 on epsxe with this config - after the intro cinematics, the emu stops at a black screen with the game music playing in the background. this doesn't happen on other gpu's.

can anyone help?
 

·
The Wingman
Joined
·
201 Posts
it seems that the roblem turned out to be that i had to enable accurate cd timing in order to get it to work.:emb: sorry to bother you.(LOUSY XA streaming still tho!)
 
1 - 3 of 3 Posts
Top