Next Generation Emulation banner

problems with Tomb Raider 2

6373 Views 2 Replies 2 Participants Last post by  jan91
hallo,

the espx v1.4.0 works very good on my computer but I´ve problems with some games.

I could not start Tomb Raider 2, I only see the intro. It seem that the game doesn´t accept the "Start" buttom from my gamepad.
In a real playstation the CD works.

Almost all other games work very good (Tomb Raider 4 too).

???
1 - 3 of 3 Posts
press f4 twice....... while ingame..... to fix the controller not working......

here is my config.......it may help

Lewpy's Glide³ Plugin Configuration Information v1.33
-----------------------------------------------------

Computer Information
OS : Microsoft Windows 98 SE (v4.10 Build 2222)
DirectX : DirectX 8 or better installed
Processor : AMD AMD Athlon(tm) Processor, 1002Mhz (1 off) (00/0642)
64kb L1-I, 64kb L1-D, 256kb L2 (on-chip)
Memory : 256Mb

Core Emulator
ePSXe : D:\EPSXE\EPSXECUTORTOOL.DLL
: 02/06/2001 22:18, 98304 bytes

*------*----------------------*---------*------------------*
| Type | Name | Version | Date |
*------*----------------------*---------*------------------*
| BIOS | SCPH1001.BIN | | 11/07/1997 05:38 |
| CDR | W9XCDRCORE | 0.0 | Plugin Not Found |
| GPU | gpuLewGlide.dll | 1.33 | 06/05/2001 17:47 |
| SPU | SPUCORE | 0.0 | Plugin Not Found |
*------*----------------------*---------*------------------*

*-----------------------------*---------------------*
| ePSXe Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Sound Enabled | Yes |
| CDDA Enabled | Yes |
| XA Enabled | Yes |
| XA Read Enabled | Yes |
| SPU IRQ Hack | Yes |
| CDROM Drive Letter | F |
| CDROM Accurate Timing | No |
| Disable CDROM Status | No |
| Disable CDROM RT Status | No |
| MDEC Enabled | Yes |
| MDEC Timing Enabled | Yes |
| SIO IRQ Always Enabled | Yes |
| Country | AutoDetect |
*-----------------------------*---------------------*

Glide³
Board : Voodoo5 (tm)
Version : 3.10.00.0674
File : C:\WINDOWS\SYSTEM\glide3x.dll
: 16/01/2001 12:38, 348160 bytes

*-----------------------------*---------------------*
| Plugin Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Active Configuration | 1 |
| Active 3dfx Card | 1 |
| Enable HotKeys | Yes |
| Resolution | 640x480 |
| Refresh Rate | 60Hz |
| Emulate MASK Bit | Yes |
| Dynamic Texture Caching | Yes |
| Custom FrameCap | 60Hz |
| On-Screen Display | FPS |
| Frame Skip | Disabled |
| FrameRate Limit | Auto |
| System Type | NTSC |
| FrameCap Method | New |
| Draw Method | Bright |
| Alpha Blending Mode | Advanced |
| Bilinear Filtering | Enabled w/o Sprites |
| Alpha Testing | Normal |
| FrameBuffer Access | Read/Write |
| Off-Screen Drawing | Full |
| Polygon Mode | Textured |
| Texture Windows | Enabled |
| VSync | Enabled |
| Banshee Code | Disabled |
| MDEC Format | Texture |
| Experimental Flipping | Off |
| Experimental Screen Sizing | Off |
| FrontBuffer Rendering Fix | Off |
| FF7 TextureWindow Fix | Off |
| DMAChain Fix | Long |
*-----------------------------*---------------------*
See less See more
works great,

thanks a lot

jan
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top