[refraction]

Rules and General Guidelines

YouTube videos only please, no rapidshare / megaupload etc.

Please be descriptive in your post, include machine specifications, plugin settings for PCSX2 and how it was recorded (eg; FRAPS, inbuilt recording etc). State the FPS the game runs at when recording and when not recording!

When putting a link to the video you may use [.url.=.] Descriptive Title [./.url] or if you prefer you may use NGemu's inbuilt handling of youtube videos:

If you YouTube video is at YouTube - PCSX2: Kingdom Hearts

Take the k43fKYc6Qos part of your url and put it between [.youtube.] [./.youtube.] BBtags so it looks like (without .'s) [.youtube.]k43fKYc6Qos[./.youtube]. This will cause you video to be 'embedded' into the forum, eg:

 

[RPGW1ZaRD]

Kingdom Hearts 2 [SLUS 21005] (U)

Speed: Emu ran at 60 FPS constant with FPS limiter on.

Configuration:
PCSX2 v0.9.4 VM Build | ZeroGS 0.97.0: 1024x768, PS3.0 | ZeroSPU2 0.4.4: Time Scaling | Linuzappz ISO CDVD driver 0.6.0 | TwinPad: PadWinK mod 0.7.0 | EERec, VU1Rec, VU0Rec, MTGS & DC, Limited (60 FPS)

System Specs:
Intel® Core™2 Duo E6750 @ 3.75GHz | NVIDIA 7900GTO 512MB @ 685/1740MHz | Team Xtreem 2x1GB @ DDR2-1126 | Creative SoundBlaster Audigy

The new PCSX2 version has next to none music hickups in FMVs thanks to ZeroSPU2 and KH2 opening runs like ~70 FPS on this setup.

 

[buugtdbgt]

YouTube - Kingomd hearts 2 opening on pcsx2
kingdom hearts 2 opening

ran 60fps durring recording but when i played the video it turned out slower then normal D:

processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+

video card: ATI Radeon HD 2600 XT

Ram:3 gigs of ddr2 ram

 

[Aidenn]

GrimGrimoire (U) [SLUS 21604]

PCSX2 0.9.4 VM, ZeroGS 0.97.0, ZeroSPU2 0.4.4, all on default with the exception of time scaling. No MTGS, no DC. Inbuilt ZeroGS recording.

My rig: P4 2,[email protected],8GHz, 2GB RAM, 7600GT, XP SP2.

Speed with recording: ~11fps
Speed without recording: ~45fps, sometimes falls to low 30s.

 

[ifurkend]

Digital Devil Saga: Avatar Tuner 2 (JP)


ZeroGS with most "speeds up" options enabled;
ZeroSPU real time mode enabled.

Recorded by FSVC, caused about 5 fps drop to the game during recording.

0.9.4 TBL

comment: Generally okay around 30~40 fps. Still need some time test the options. Nice cut-scene smoothness.

0.9.4 VM,

comment: above 60 fps while the screen only shows 2 character models during the battle. Sucks in most place, low fps for real-time cut-scenes. (20~30 fps)

0.9.4 TBL

recorded by in-build recorder. Audio by ZeroSPU2 0.44 needed to be stretched for 97% (preserve pitch) in order to match the video.

7~15 fps during record.

 

[Insung]

don't suppose anyone can post a dq8 video?

 

[refraction]

don't suppose anyone can post a dq8 video?

stop spamming questions about dragons quest 8, if someone has one, they will post one, otherwise just try it yourself! jeez...

 

[ifurkend]

Shin Megami Tensei III Nocturne (vanilla version, JP)

0.9.4 TBL, Interlace mode 0 (a must!), 4X AA.
Recorded by FSVC.

comment: 30~60 fps, generally acceptable.

 

[biomage]

Grandia 3 [Slus_213.34]

Configuration:
PCSX2 v0.9.4 VM Build | ZeroGS 0.97.0: 640x480, PS3.0, no color clamping enable | P.E.Op.S SPU2 1.9.0:Cubic interpolation | P.E.Op.S CDVD Driver 1.2.0 | SSSPSX PAD Plugin Pressure Mod 1.6.0 | EERec, VU1Rec, VU0Rec, MTGS , Normal

 

[v3pcgames]

 

[biomage]

Dragon Ball Budokai 3 [Slus_209.98]

Configuration:
PCSX2 v0.9.4 VM Build | ZeroGS 0.97.0: 640x480, PS3.0 | ZeroSPU2 0.4.4:Mute | P.E.Op.S CDVD Driver 1.2.0 | SSSPSX PAD Plugin Pressure Mod 1.6.0 | EERec, VU1Rec, VU0Rec, MTGS , Normal

A little joke for you, Gogeta kill Gogeta with 100x Big Bang Kamehameha enjoy

 

[boboK]

Romance of the Three Kingdoms XI on PCSX2

Romance of the Three Kingdoms XI on PCSX2v9.4 (run good) my pc 8500GS and dual core2 m intal 965


29-40fp

 

[inane]

No stream, didn't want to lower quality any more than I already have.

Video of FF12:
http://imk.cx/videos/ff12.mp4 (39.15mb)

Recorded with Fraps.
Encoding options used:
http://imk.cx/videos/ff12.txt

 

[neogen5]

Dragon Ball Budokai 3 [Slus_209.98]

Configuration:
PCSX2 v0.9.4 VM Build | ZeroGS 0.97.0: 640x480, PS3.0 | ZeroSPU2 0.4.4:Mute | P.E.Op.S CDVD Driver 1.2.0 | SSSPSX PAD Plugin Pressure Mod 1.6.0 | EERec, VU1Rec, VU0Rec, MTGS , Normal

A little joke for you, Gogeta kill Gogeta with 100x Big Bang Kamehameha enjoy

What is your PCSX2 config? ZeroGS config and all other config? Coz i'm using P4 Northwood 3.2 "HT", 1024MB Corsair XMS and 7800GS 256MB @ 700/700 and get around your speed. Maybe if I use your setting can get more FPS for me...

 

[biomage]

I use default setting on ZeroGS Kozmos 0.97.0, you can see, i use P.E.Op.S CDVD Driver 1.2.0 Plugin, that why the speed is so fast

 

[GAMERR]

Warriors Orochi [PAL]

Intel Core2Duo E6700 2.66 Ghz
2048 pc 6400 Cas 4 Corsair
8800 GTX 768 mo GDDR 3


PCSX2 0.9.4 32-bit
MTGS & DC Enabled
Gsdx9 0.10.7 : PS3.0 ; Windowed
Zero SPU2
Linuzappz ISO CDVD 0.6.0

 

[ryuuken67]

look my video it's dragon ball z tenkaichi 3 on pcsx2 0.9.4
Video Tenkaichi 3 sur emulateur pcsx2 sur pc - dragonballz, dragon, ball, z, 0.9.0.4 - Dailymotion Share Your Videos

 

[Play!PS2]

DynastyWarriors3

Speed:
30~60 fps, generally acceptable.
Configuration:
PCSX2 v0.9.4 VM Build
GSdx9 (MSVC 14.00)0.10.5 - D3D/PS3.0
P.E.Op.S SPU2 1.9.0
Linuzappz CDVD 0.7.0
System Specs:
Athlon64 X2 4800+/OCZ DDR PC4800/EN7800GTX

Ys3 wonderers from ys

Speed:
40~60 fps, generally acceptable.
Configuration:
PCSX2 v0.9.4 VM Build
GSdx9 (MSVC 14.00)0.10.5 - D3D/PS3.0
P.E.Op.S SPU2 1.9.0
P.E.Op.S CDVD 1.3.0
System Specs:
Athlon64 X2 4800+/OCZ DDR PC4800/EN7800GTX

 

[NexXxus]

GTA Liberty City Stories


Average fps: 15-30 when you see the city, 60-80fps somewhere where you can't see the city.
max fps: over 100 when i look down to the ground
status: almost playable

note: works faster with 256 color hack, you can also try some hacks in zeroGS and fastmemory patch to get it faster.

system:
core2duo e6700 2.6 ghz
Geforce 7900gt

i recorded it with my cam because fraps is not working anymore on my PC

Dirge of Cerberus

Average FPS: 30 or something

used gsdx9 0.10.9, its faster and don't have so much gfx bugs like ZeroGS.

First Problem:
At the beginning, i can't climb to the roof and get stuck in this ladder, maybe a physic bug?
btw: fraps works now, but trial, whatever

 

[Adrian-ex]

DBZ Budokai 3 [PAL] Intro

Hi guys,

I thought to me why not post that cool intro and here is it with the PCSX2 0.9.4
the game runs at 20-250 and without recording
at 20-30.

DBZ Budokai 3 [PAL] Intro - My Video

PCSX2 0.9.4 Config:
ZeroGS KOSMOS 97.1 default settigs 1024x768x32, noAA,noBF
ZeroSPU2 0.4.4 Timescaling on
SSSPSX PAD 1.7 MOD
Linuxappz 0.7
BIOS 2.20 Europe
MTGS on
DC on
Limit frames