Next Generation Emulation banner
1 - 2 of 2 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
my skill is so bad.
i'm want to help developing cxbx.
i have source and go developing.
so i have xdk and i use xdk sample(xray)
but it don't work in cxbx(Cxbx 0.7.8c-Source)
i'm alreadly turn on trace mode.

this is Kernel debuging message. :hdbash:

Emu (0xE04): Debug console allocated (DM_FILE).
Emu (0xE04): Debug Trace Enabled.
Emu (0xE04): EmuInit
(
pTLSData : 0x0022BA5C
pTLS : 0x0022BA44
pLibraryVersion : 0x0022B9E4
DebugConsole : 0x00000002
DebugFilename : "C:\KrnlDebug.txt"
pXBEHeader : 0x0022A8E0
pXBEHeaderSize : 0x00001000
Entry : 0x000A0786
);
Emu (0xE04): Detected Microsoft XDK application...
Emu (0xE04): Beginning HLE Pass 0...
Emu (0xE04): Locating HLE Information for XAPILIBD 1.0.5849...Skipped
Emu (0xE04): Locating HLE Information for D3D8D 1.0.5849...Skipped
Emu (0xE04): Locating HLE Information for D3DX8D 1.0.5849...Skipped
Emu (0xE04): Locating HLE Information for XGRAPHCD 1.0.5849...Skipped
Emu (0xE04): Locating HLE Information for XBOXKRNL 1.0.5849...Skipped
Emu (0xE04): Locating HLE Information for LIBCD 1.0.5849...Skipped
Emu (0xE04): Resolved 0 cross reference(s)
EmuFS (0xE04): TLS Data Dump...
0x00A915D0: 0000000000000000
0x00A915DF: 0000000000000000
0x00A915EF: 0000000000000000
0x00A915FF: 0000000000000000
0x00A9160F: 0000000000000000
0x00A9161F: 0000000000000000
0x00A9162F: 0000000000000000
0x00A9163F: 0000000000000000
0x00A9164F: 0000000000000000
0x00A9165F: 0000000000000000
0x00A9166F: 0000000000000000
0x00A9167F: 0000000000000000
0x00A9168F: 0000000000000000
0x00A9169F: 0000000000000000
0x00A916AF: 0000000000000000
0x00A916BF: 0000000000000000
0x00A916CF: 0000000000000000
0x00A916DF: 0000000000000000
0x00A916EF: 0000000000000000
0x00A916FF: 0000000000000000
0x00A9170F: 0000000000000000
0x00A9171F: 0000000000000000
0x00A9172F: 0000000000000000
0x00A9173F: 0000000000000000
0x00A9174F: 0000000000000000
0x00A9175F: 0000000000000000
0x00A9176F: 0000000000000000
0x00A9177F: 0000000000000000
0x00A9178F: 0000000000000000
0x00A9179F: 0000000000000000
0x00A917AF: 0000000000000000
0x00A917BF: 0000000000000000
0x00A917CF: 00000000
EmuFS (0xE04): OrgFS=59 NewFS=15 pTLS=0x0022BA44
Emu (0xE04): Initializing Direct3D.
EmuD3D8 (0xE00): Timing thread is running.
EmuD3D8 (0xE24): CreateDevice proxy thread is running.
EmuD3D8 (0xDFC): Message-Pump thread is running.
EmuD3D8 (0xE04): EmuIDirect3D8_CreateDevice
(
Adapter : 0x00000000
DeviceType : 0x00000001
hFocusWindow : 0x00000000
BehaviorFlags : 0x00000040
pPresentationParameters : 0x0035F86C
ppReturnedDeviceInterface : 0x1003DF48
);
EmuD3D8 (0xE24): CreateDevice proxy thread recieved request.
EmuD3D8 (0xE24): Using hardware vertex processing
Emu (0xE24): *WARNING* -> YUY2 overlays are not supported in hardware, could be slow!
Emu (0xE04): Initial thread starting.
EmuKrnl (0xE04): PsCreateSystemThreadEx
(
ThreadHandle : 0x0035F8A8
ThreadExtraSize : 0x00000000
KernelStackSize : 0x00000000
TlsDataSize : 0x00000214
ThreadId : 0x00000000
StartContext1 : 0x0009FD54
StartContext2 : 0x00000000
CreateSuspended : 0x00000000
DebugStack : 0x00000000
StartRoutine : 0x0009D26B
);
EmuKrnl (0xE80): PCSTProxy
(
StartContext1 : 0x0009FD54
StartContext2 : 0x00000000
StartRoutine : 0x0009D26B
);
EmuFS (0xE80): TLS Data Dump...
0x00A922E0: 0000000000000000
0x00A922EF: 0000000000000000
0x00A922FF: 0000000000000000
0x00A9230F: 0000000000000000
0x00A9231F: 0000000000000000
0x00A9232F: 0000000000000000
0x00A9233F: 0000000000000000
0x00A9234F: 0000000000000000
0x00A9235F: 0000000000000000
0x00A9236F: 0000000000000000
0x00A9237F: 0000000000000000
0x00A9238F: 0000000000000000
0x00A9239F: 0000000000000000
0x00A923AF: 0000000000000000
0x00A923BF: 0000000000000000
0x00A923CF: 0000000000000000
0x00A923DF: 0000000000000000
0x00A923EF: 0000000000000000
0x00A923FF: 0000000000000000
0x00A9240F: 0000000000000000
0x00A9241F: 0000000000000000
0x00A9242F: 0000000000000000
0x00A9243F: 0000000000000000
0x00A9244F: 0000000000000000
0x00A9245F: 0000000000000000
0x00A9246F: 0000000000000000
0x00A9247F: 0000000000000000
0x00A9248F: 0000000000000000
0x00A9249F: 0000000000000000
0x00A924AF: 0000000000000000
0x00A924BF: 0000000000000000
0x00A924CF: 0000000000000000
0x00A924DF: 00000000
EmuFS (0xE80): OrgFS=59 NewFS=23 pTLS=0x0022BA44
EmuKrnl (0xE04): NtClose
(
Handle : 0x0000010C
);
Emu (0xE04): Initial thread ended.

why NtClose is runing ??
so i insight kernelthunk.
it jump to panic[0x0108].
panic[0x0108] maybe a XBSYSAPI VOID *RtlAssert.
i don't have any idea.
so anybody please teach me.
i want to see xray playing.

my system is amdxp,radeon8500,xp service pack3,via board.
 

· Registered
Joined
·
1,056 Posts
i would start with getting some info on the xbox system like how stuff works. Read up on it, also, you need to understand this emulator is pretty much dead. If you wanna pick it up then you have a long road ahead of you. If this would be the first emulator you have worked on maybe you would wanna start with gba first.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top