Next Generation Emulation banner
1 - 2 of 2 Posts

· Super Moderator
Joined
·
5,540 Posts
Discussion Starter · #1 ·
* New System Drivers Supported (in no particular order):

* Atari 1200XL (not working) [Fabio Priuli]
* Atari 600XL (not working) [Fabio Priuli]
* Atari 65XE (not working) [Fabio Priuli]
* Atari 65XE Arabic (not working) [Fabio Priuli]
* Atari 130XE (not working) [Fabio Priuli]
* Atari 800XE (not working) [Fabio Priuli]
* Atari XEGS (not working) [Fabio Priuli]
* Dator 3000 (not working) [Roberto Carlos Fernandez
* Gerhardt, Wilbert Pol]
* **** Smith Wizzard [Curt Coder]
* **** Smith VZ 2000 [Curt Coder]
* DEC VT100 (not working) [Miodrag Milanovic]
* Hanimex Rameses [Curt Coder]
* Kaypro II (Model 2/83) (not working) [Robbbert]
* Kaypro 4 (Model 4/83) (not working) [Robbbert]
* Kaypro 2x (Model 2/84) (not working) [Robbbert]
* Kaypro 10 (not working) [Robbbert]
* Kyocera Kyotronic 85 (not working) [Fabio Priuli]
* LLC1 (not working) [Miodrag Milanovic]
* LLC2 [Miodrag Milanovic]
* NEC PC-8201A (not working) [Fabio Priuli]
* Nokia MikroMikko 1 M6 (not working) [Curt Coder]
* Nokia MikroMikko 1 M7 (not working) [Curt Coder]
* NTS DreamWriter T400 (not working) [Roberto Carlos
* Fernandez Gerhardt, Wilbert Pol]
* Olivetti M10 (not working) [Fabio Priuli]
* Omni II (not working) [Robbbert]
* Sanyo Creativision MK-II [Curt Coder]
* SNK NeoGeo Pocket [Wilbert Pol]
* SNK NeoGeo Pocket Color [Wilbert Pol]
* Talking Electronics Computer (TEC-1) [Robbbert]
* TRS-80 Model 100 (not working) [Fabio Priuli]
* TRS-80 Model 102 (not working) [Fabio Priuli]
* TRS-80 Model 200 (not working) [Fabio Priuli]
* Walther ES-210 (not working) [Roberto Carlos Fernandez Gerhardt, Wilbert Pol]
* Z1013 (Model with 8×4 and 8×8 keyboard) [Miodrag Milanovic]
* Z80 N.E. [Roberto Lavarone]

* System Driver Changes: [A7800] Better NTSC palette. [Robert Tuccitto, Underball, GroovyBee]
* [ATARI] Refactored MESS specific code from MAME to MESS source. [Fabio Priuli]
* [ATARI] Updated keyboard and keypad scan handling to be more accurate. Added natural keyboard support. [Fabio Priuli]
* [ATARI] Fixed PIA regression. Floppy disks work again. [Fabio Priuli]
* [ATMOS] Added Basic v1.2x enhanced BIOS [Fabio Priuli]
* [COLECO] Converted to use PORT_CATEGORY for controller selection. Look into the Category Menu (after pressing TAB) to enable Extra controllers. [Fabio Priuli]
* [COLECO] Fixed Super Action Controller emulation (it was missing additional action buttons and P2 slider). [Fabio Priuli]
* [CRVISION] Added tape loading. You can now load tapes which have only the left track. Stereo (data+audio) tapes are not supported yet. [Curt Coder]
* [ELECTRON] Fixed graphical display modes. [Robbbert]
* [MBEE] The pc85 now has the correct bioses (Thanks to Stewart Kay and IanM).
The shell multi-rom selector is working. The bad dump of Telcom 3.21 has been replaced. The rom banking feature of Telcom 3.21 is now emulated. [Robbbert]
* [SPECTRUM] Removed Spectrum+ keyboard keys from earlier models (and from some clones). Moved Joystick interface selection to the Category Menu. [Fabio Priuli]
* [SPECTRUM] Added natural keyboard support. [Fabio Priuli]
* [STUDIO2] Fixed .st2 cartridge loading. [Curt Coder]
* [TI99 family] Added functionality for multi-cartridge handling. Added support for complex/multi-file cartridge images. [Michael Zapf]
* [TI99_8] Fixed the driver and removed the GAME_NOT_WORKING flag. [Michael Zapf]

* [TRS80] Various improvements: [Robbbert] added centronics printer
* cassette works on all clones
* Model III/4 RTC and cassette hooked up
* UART added
* LNW-80 graphics and colour added
* ht1080z and system-80 extension roms added

* [X68000] Added support for 3 and 6 button Megadrive gamepads. [Barry Rodewald]
* [ZX] Improved natural keyboard support. Removed hacky double mappings for Cursor Keys (and a few others). To access these keys, now you have to either press Shift together with another key, like in the real keyboard, or simply switch to natural keyboard emulation [Fabio Priuli]
* Added natural keyboard support to a number of drivers: ac1.c, amiga.c, apogee.c, b2m.c, bk.c, einstein.c, galeb.c, homelab.c, irisha.c, mikro80.c, mikrosha.c, mz80.c, orao.c, partner.c, pecom.c, radio86.c, sapi1.c, special.c, ti99_8.c, tm990189.c, ut88.c [Fabio Priuli]

User Interface Changes:
(none)

Imgtool Changes:
(none)

* Source Changes: The core is based on MAME 0.131. This incorporates all features of the update to this core. [MAME team]
* New tool added (castool) for cassette to wav conversion [Miodrag Milanovic]
Site @ The Official MESS Home Page
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top