Next Generation Emulation banner

kega fusion mouse lag

2549 Views 7 Replies 3 Participants Last post by  Squall-Leonhart
extremely strange i thinkoO

but while i after i have been running fusion for a little while, and after i exit fusion, my mouse or computer continues to lag for a long time

it feels like im using the mouse on a surface you should not use a mouse on, but after a while, i dont know how long, the mouse starts to work again, so i have stopped using fusion for now, i am using gens plus at the moment but i dont like it much

i love fusion but i cant use it if it is going to make my mouse go mad and not work properly, so i hope someone can help my fix this so i can enjoy fusion
1 - 8 of 8 Posts
;---------------------------------
; Fusion Configuration File
;---------------------------------


;---------------------------------
; Graphics Compatibility Options
;---------------------------------

ForceCompatibleGFX=0
CompatibleGFXOpt=0
EnhancedGFXOpt=1
ForceFullScreen32=1
VistaAeroIgnore=0
VistaNoWndVSync=0
DebugFlags=0,0,1,1

;---------------------------------
; Sound Compatibility Options
;---------------------------------

ForceSWBuffer=0

;---------------------------------
; SG1000/SC3000/SMS/GG Specific
;---------------------------------

SMSSpriteLimitDisable=0
YM2413Disable=0
SMSBIOSDisable=0
SMSBorderDisable=1
GameGearZoom=0

;---------------------------------
; MegaDrive/Genesis Specific
;---------------------------------

AutoChecksums=1
GenBorderDisable=1

;---------------------------------
; Mega CD/Sega CD Specific
;---------------------------------


CDReadAhead=8
CD+GMode=1
ForceASPI=0
BRMPerGame=1
LEDEnabled=1
PerfectSync=0

;---------------------------------
; 32X Specific
;---------------------------------

Disable32X=0
Fast32XTiming=0

;---------------------------------
; Expert Options [DANGER! RTFM!]
;---------------------------------

RefreshRate60Hz=60
RefreshRate50Hz=100
UseExpertModes=1
UseAutoSwitching=0
MinSwitchDelay=100
Mode256x240=640,480,60,100,640,480
Mode256x480=640,480,60,100,640,480
Mode320x240=640,480,60,100,640,480
Mode320x480=640,480,60,100,640,480

;---------------------------------
; General Settings
;---------------------------------

WAVFilesPath=D:\Cartridge\SEGA\*.wav
VGMFilesPath=D:\Cartridge\SEGA\*.vgm
AVIFilesPath=D:\Cartridge\SEGA\*.avi
ScreenshotPath=D:\Cartridge\SEGA\screenshots
ScreenshotType=0
ScreenshotMode=1
CurrentCountry=0
CountryAutoDetect=1
CountryOrder=0
CurrentWaveFormat=2
SoundOverdrive=1
SoundSuperHQ=1
SoundDisabled=0
SoundFilter=0
CurrentRenderMode=1
FullScreen=0
DRenderMode=3
DFixedAspect=0
DFixedZoom=0
DFiltered=1
DNTSCAspect=1
DNearestMultiple=0
DScanlines=4
VSyncEnabled=0
MultiTapType=0
InvertMouse=0
LightgunCursor=1
FPSEnabled=1
CurrentRenderPlugin=14
AllowSleeping=1
AlternateTiming=0
DisableShortcuts=0
ThreadPriority=0
StaticDisabled=1
Brighten=1
CartBootEnabled=0
VGM_Version=16,1

these are my settings and i get no mouse lag..
See less See more
update your mouse drivers, i had the same issue with bad logitech drivers
ok thank you, i have updated to logitech setpoint 4.8, if that dont work i guess i will have to try them settings
strange, it works now, but it works because i moved the receiver, didnt move it far though, only moved it a little, but i find it strange that the mouse was only lagging when running fusion and dolphin and not at all other timesoO
i've noticed increased cpu load to cause mouse lag when my reciever is poorly placed.
yes i thought it was that, but mouse was not playing around when i run other applications that use high cpu load, strange
emulation tends to be a little harder on a cpu then most games are.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top