Next Generation Emulation banner

Humbly request... Chrono Cross configuration...?

1054 Views 2 Replies 3 Participants Last post by  Zephon
Hi everyone again! I just bought Chrono Cross, and I was wondering if anyone of you know a good configuration to play the game, y'know, good sound and graphics.

Thanks in advance!

Lewpy's Glide³ Plugin Configuration Information v1.35
-----------------------------------------------------

Computer Information
OS : Microsoft Windows 98 SE (v4.10 Build 2222)
DirectX : DirectX 8.0 installed
Processor : Intel Pentium III, 502Mhz (1 off) (00/0672)
16kb L1-I, 16kb L1-D, 512kb L2 (on-chip)
Memory : 192Mb

Core Emulator
ePSXe : D:\MY DOWNLOAD FILES\PSX EMULATOR\EPSXE.EXE
: 25/06/2001 20:31, 153088 bytes

*------*----------------------*---------*------------------*
| Type | Name | Version | Date |
*------*----------------------*---------*------------------*
| BIOS | SCPH1001.BIN | | 11/07/1997 05:38 |
| CDR | W9XCDRCORE | 0.0 | Plugin Not Found |
| GPU | gpuLewGlide.dll | 1.35 | 01/08/2001 20:05 |
| SPU | spuIori.dll | 1.4 | 01/09/2001 22:58 |
*------*----------------------*---------*------------------*

*-----------------------------*---------------------*
| ePSXe Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Sound Enabled | Yes |
| CDDA Enabled | Yes |
| XA Enabled | Yes |
| XA Read Enabled | Yes |
| SPU IRQ Hack | No |
| CDROM Drive Letter | G |
| CDROM Accurate Timing | Yes |
| Disable CDROM Status | Yes |
| MDEC Enabled | Yes |
| MDEC Timing Enabled | Yes |
| SIO IRQ Always Enabled | No |
| Country | AutoDetect |
*-----------------------------*---------------------*

Glide³
Board : Voodoo5 (tm)
Version : 3.10.00.0658
File : C:\WINDOWS\SYSTEM\glide3x.dll
: 02/11/2000 04:32, 329728 bytes

*-----------------------------*---------------------*
| Plugin Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Active Configuration | 1 |
| Active 3dfx Card | 1 |
| Enable HotKeys | Yes |
| Resolution | 640x480 |
| Refresh Rate | 75Hz |
| Emulate MASK Bit | No |
| Dynamic Texture Caching | Yes |
| Custom FrameCap | 60Hz |
| On-Screen Display | Off |
| Frame Skip | Disabled |
| FrameRate Limit | Auto |
| System Type | NTSC |
| FrameCap Method | New |
| Draw Method | Bright |
| Alpha Blending Mode | Advanced |
| Bilinear Filtering | Enabled w/o Sprites |
| Alpha Testing | Normal |
| FrameBuffer Access | Write |
| Off-Screen Drawing | Basic |
| Polygon Mode | Textured |
| Texture Windows | Enabled |
| VSync | Enabled |
| Banshee Code | Enabled |
| MDEC Format | Texture |
| Experimental Flipping | Off |
| Experimental Screen Sizing | Off |
| FrontBuffer Rendering Fix | Off |
| FF7 TextureWindow Fix | Off |
| DMAChain Fix | Long |
*-----------------------------*---------------------*
See less See more
1 - 3 of 3 Posts
That's the config I use:
- Lewpy's Glide Driver
- Andy's SPU
- Pete's CD-Rom

I can get 60fps easily with my voodoo2 and that config... :p
You don't need "CDROM Accurate Timing" or "Disable CDROM Status" to play CC. The others config seems to be ok, but as you have a good video card, you could increase your screen resolution. Also, if you want all effects in the game, you'll have to set "FrameBuffer Access" to Read/Write and "Off-Screen Drawing" to Extra or Full. However, this may decrase the performance in certain parts of the game.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top