Next Generation Emulation banner

Help with jerkky movie

968 Views 5 Replies 3 Participants Last post by  Xenomorph
Every movie on PS game run very jerkky on my epsex, I have to skip everyone of them. Can anyone help me? I am using a sony CDU4811. I notice that the movie also play very bad on VGS. Is it my cdrom problem. here are my spec:

Should i use directx 7 instead of directx 8? Will it effect my problem?

Lewpy's Glide³ Plugin Configuration Information v1.33
-----------------------------------------------------

Computer Information
OS : Microsoft Windows 98 SE (v4.10 Build 2222)
DirectX : DirectX 7 installed
Processor : Intel Celeron, 501Mhz (1 off) (00/0665)
16kb L1-I, 16kb L1-D, 128kb L2 (on-chip)
Memory : 128Mb

Core Emulator
ePSXe : D:\EPSXE\EPSXE.EXE
: 07/03/2001 22:50, 148480 bytes

*------*----------------------*---------*------------------*
| Type | Name | Version | Date |
*------*----------------------*---------*------------------*
| BIOS | scph7502.bin | | 17/07/2000 23:28 |
| CDR | cdrBarrett.dll | 1.1 | 15/10/2000 18:26 |
| GPU | gpuLewGlide.dll | 1.33 | 06/05/2001 17:47 |
| SPU | spuPeteMidas.dll | 1.7 | 18/02/2001 10:20 |
*------*----------------------*---------*------------------*

*-----------------------------*---------------------*
| ePSXe Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Sound Enabled | Yes |
| CDDA Enabled | Yes |
| XA Enabled | Yes |
| XA Read Enabled | Yes |
| SPU IRQ Hack | No |
| CDROM Drive Letter | E |
| CDROM Accurate Timing | No |
| Disable CDROM Status | No |
| Disable CDROM RT Status | Yes |
| Country | AutoDetect |
*-----------------------------*---------------------*

Glide³
Board : Voodoo3 (tm)
Version : 3.10.00.0658
File : C:\WINDOWS\SYSTEM\glide3x.dll
: 02/11/2000 12:32, 329728 bytes

*-----------------------------*---------------------*
| Plugin Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Active Configuration | 1 |
| Active 3dfx Card | 1 |
| Enable HotKeys | No |
| Resolution | 800x600 |
| Refresh Rate | 60Hz |
| Emulate MASK Bit | No |
| Dynamic Texture Caching | Yes |
| Custom FrameCap | 200Hz |
| On-Screen Display | Off |
| Frame Skip | Disabled |
| FrameRate Limit | Custom |
| System Type | NTSC |
| FrameCap Method | New |
| Draw Method | Bright |
| Alpha Blending Mode | Advanced |
| Bilinear Filtering | Disabled |
| Alpha Testing | Normal |
| FrameBuffer Access | Write |
| Off-Screen Drawing | Basic |
| Polygon Mode | Textured |
| Texture Windows | Enabled |
| VSync | Enabled |
| Banshee Code | Enabled |
| MDEC Format | Texture |
| Experimental Flipping | Off |
| Experimental Screen Sizing | Off |
| FrontBuffer Rendering Fix | Off |
| FF7 TextureWindow Fix | Off |
| DMAChain Fix | Long |
*-----------------------------*---------------------*
See less See more
1 - 2 of 6 Posts
Still can't solved

Thanks for all ur reply but still can't solve my problem. I think it is definetely a cdrom problem. I did cddump and iso file gives better result. Anyone using a Sony CDU4811 out there? did u upgrade any firmware or driver?

No. it is not a system problem as my roomate with a p2 350, tnt card runs smoother movie than me.

I tried the pete cd plugin but it hang my comp.
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top