Next Generation Emulation banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
OK... i followed the guide on how to install PCSX2 and all the plugins. The thing is when i try to run my import Tales of Destiny 2, it doesn't.
What i mean is i can go through the menu then, when it's the time to press on the DVD to play the game, it makes a dark screen and then go back to the ps2 menu again. I have tried to uncheck some option but it's still the same error...

U mby want to look at the console:

-help to see arguments
PCSX2 v0.9.5 save ver: 7a300010
EE pc offset: 0x2a8, PSX pc offset: 0x208
x86Init:
CPU vender name = AuthenticAMD
FamilyID = 3
x86Family = AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
CPU speed = 2.558 Ghz
x86PType = Standard OEM
x86Flags = 178bfbff 00002001
x86EFlags = ebd3fbff
Features:
Detected MMX
Detected SSE
Detected SSE2
Detected SSE3
Not Detected SSE4.1
Extented AMD Features:
Detected MMX2
Detected 3DNOW
Detected 3DNOW2
gsInit
F1 - save state
(Shift +) F2 - cycle states
F3 - load state
F10 - dump performance counters
F11 - save GS state
F12 - dump hardware registers
EE Recompiler data reset
Bios Version 1.0



**************
rom2 NOT FOUND
**************





**************
erom NOT FOUND
**************


GIF reset
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
detected blocksize = 2352
isoOpen: C:\Downloads\Tales of Destiny 2\Tales of Destiny II Disc 2.bin ok
offset = 0
blockofs = 0
blocksize = 2352
blocks = 246126
type = 1
gsOpen done
Starting GS thread
Using Frame Skipping: Limit
Framelimiter rate updated (cpuExecuteBios): 60 fps
* PCSX2 *: ExecuteBios
# Initialize memory (rev:3.17, ctm:393Mhz, cpuclk:295Mhz )
# Total accessable memory size: 32 MB (B:2:8:0)
# TLB spad=0 kernel=1:12 default=13:30 extended=31:38
# Initialize Start.
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
Counter 0 not running c0 seb26ba ceb3dcc
Counter 1 not running c0 seb26ba ceb3dcc
Counter 2 not running c0 seb26ba ceb3dcc
Starting 2, vc80
Counter 3 not running c0 seb26ba ceb3dcc
Starting 3, vc83
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Initialize Done.

EE DECI2 Manager version 0.06 Dec 10 1999 17:48:37
CPUID=2e20, BoardID=0, ROMGEN=2000-0117, 32M

# Loader 'rom0:OSDSYS':pc=00200008
EE Recompiler data reset
* PCSX2 *: ExecuteBios Complete
PCSX2 v0.9.5
ExecuteBios Complete
loadElfFile:
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
ExecutePs2GameDisk
cdvdReadKey(0, 0, 75)
exeName = ÐeZ
CDVD.KEY = 28,80,B6,1C,6D,2C,05
CdRead: Reading Sector 16(1 Blocks of Size 2048) at Speed=24x
CdRead: Reading Sector 18(1 Blocks of Size 2048) at Speed=24x
CdRead: Reading Sector 22(1 Blocks of Size 2048) at Speed=24x
CdRead: Reading Sector 231952(1 Blocks of Size 2048) at Speed=24x
CdRead: Reading Sector 231952(1 Blocks of Size 2048) at Speed=24x
!!! !!! !!! !!!
# Restart.
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
Counter 0 not running c0 s5518559e c55188d0e
Counter 1 not running c0 s5518559e c55188d0e
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Restart Done.
# LoadExec 'rom0:OSDSYS':pc=00200008
Counter 0 not running c0 s60d376c2 c60d38841
Starting 0, v83
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
ExecutePs2GameDisk
cdvdReadKey(0, 0, 75)
exeName = ÐeZ
CDVD.KEY = 28,80,B6,1C,6D,2C,05
CdRead: Reading Sector 16(1 Blocks of Size 2048) at Speed=24x
CdRead: Reading Sector 18(1 Blocks of Size 2048) at Speed=24x
CdRead: Reading Sector 22(1 Blocks of Size 2048) at Speed=24x
CdRead: Reading Sector 231952(1 Blocks of Size 2048) at Speed=24x
CdRead: Reading Sector 231952(1 Blocks of Size 2048) at Speed=24x
!!! !!! !!! !!!
# Restart.
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
Stopping
Counter 1 not running c0 sadabe5dc cadabfcee
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Restart Done.
# LoadExec 'rom0:OSDSYS':pc=00200008
Counter 0 not running c0 sb8d0c032 cb8d0d1b1
Starting 0, v83
NTSC
Framelimiter rate updated (UpdateVSyncRate): 60 fps
 

·
troubleshooter
Joined
·
7,514 Posts
Are you using File -> DVD, not Run -> Execute? R->E takes you to the BIOS, which you don't want.
Execute does not take you to the bios, it just executes the bios and when its done, the game starts normally.
@meilod00
You must not have configured the cd/dvd plugin. configure the cd/dvd plugin to point to where your game disc or ISO is located.
After you have done that, use Run>CD/DVD to play the game.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #4 (Edited)
The thing is i have the linuzappz ISO CDDVD 0.7.0 plugin so when i try to configure the plugin there's not much of an option.
Just to know... am i the only one who have got that error and what is the best cd/dvd plugin?
 

·
Registered
Joined
·
3 Posts
Discussion Starter #7
I just tried the cd/dvd plugin and the bios is still always comming back.
Mby it's because of my bios after all?
Cause since i want to play TOD2 wich is a (J) game, i took the japanese bios but mby my bios is just messing with me "_"
Anyway, can one of u guys say if TOD2 is compatible with PCSX2 9.5?
 
1 - 7 of 7 Posts
Top