Next Generation Emulation banner

FF7 again and PE2

2K views 22 replies 10 participants last post by  Cajunspirit 
#1 ·
Why the sudden slowden in FF7 when in the chocobo racing area where you plac your bets?
Why won't Parasite Eve 2(US) start up?
 
#2 ·
Originally posted by Cajunspirit
Why the sudden slowden in FF7 when in the chocobo racing area where you plac your bets?
Why won't Parasite Eve 2(US) start up?
upper left hand corner of your screen in the forums is a search button, you know it really does work, and also before asking general compatibility questions ( specially for PE2 ) use that search tool. and you would of found a thread at

here

now as for the FF7 prob, can you post your configs and stuff it would help greatly.
 
#4 ·
errr......

Let's see I'm runnin' a P4 933mhz ATI Radeon 256K SDram.EpsxE V.1.4
Pete's D3D driver 1.50(by pete bernette)
R8 G8 B8 A8
Dynamic
Extended
32 bit
Show fps on start up/use FPs limit/Frame skipping:eek:ff/Limit:200
Enhance hardware
Emulated vram
Alpha multi pass
Mask bit
:p :eyes: :eek: :( :( :( :dead: :mad: :p :mad:
 
#11 ·
depends on if u have a glide using card, otherwise Pete's Software does the trick nicely!!! :p
 
#16 ·
Re: Re: Re: Re: ughghh

Originally posted by Badaro


Really? Can you post me the settings you're using for FF7, fivefeet8?

[]s Badaro
Lewpy's Glide³ Plugin Configuration Information v1.35
-----------------------------------------------------

Computer Information
OS : Microsoft Windows 98 SE (v4.10 Build 2222)
DirectX : DirectX 8.0 installed
Processor : AMD AMD Athlon(tm) processor, 1001Mhz (1 off) (00/0642)
64kb L1-I, 64kb L1-D, 256kb L2 (on-chip)
Memory : 256Mb

Core Emulator
ePSXe : D:\EPSXE\EPSXE.EXE
: 25/06/2001 20:31, 153088 bytes

*------*----------------------*---------*------------------*
| Type | Name | Version | Date |
*------*----------------------*---------*------------------*
| BIOS | SCPH1001.BIN | | 11/07/1997 05:38 |
| CDR | W9XCDRCORE | 0.0 | Plugin Not Found |
| GPU | gpuLewGlide.dll | 1.35 | 01/08/2001 20:05 |
| SPU | spuEternal.dll | 1.0 | 28/10/2001 00:31 |
*------*----------------------*---------*------------------*

*-----------------------------*---------------------*
| ePSXe Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Sound Enabled | Yes |
| CDDA Enabled | Yes |
| XA Enabled | Yes |
| XA Read Enabled | Yes |
| SPU IRQ Hack | No |
| CDROM Drive Letter | F |
| CDROM Accurate Timing | No |
| Disable CDROM Status | No |
| Disable CDROM RT Status | No |
| MDEC Enabled | Yes |
| MDEC Timing Enabled | Yes |
| SIO IRQ Always Enabled | Yes |
| Country | AutoDetect |
*-----------------------------*---------------------*

Glide³
Board : Voodoo5 (tm)
Version : 3.10.00.0674
File : C:\WINDOWS\SYSTEM\glide3x.dll
: 16/01/2001 12:38, 348160 bytes

*-----------------------------*---------------------*
| Plugin Configuration Item | Current Setting |
*-----------------------------*---------------------*
| Active Configuration | 1 |
| Active 3dfx Card | 1 |
| Enable HotKeys | Yes |
| Resolution | 640x480 |
| Refresh Rate | 60Hz |
| Emulate MASK Bit | Yes |
| Dynamic Texture Caching | Yes |
| Custom FrameCap | 70Hz |
| On-Screen Display | Off |
| Frame Skip | Disabled |
| FrameRate Limit | Custom |
| System Type | NTSC |
| FrameCap Method | New |
| Draw Method | Bright |
| Alpha Blending Mode | Advanced |
| Bilinear Filtering | Enabled w/o Sprites |
| Alpha Testing | Normal |
| FrameBuffer Access | Read/Write |
| Off-Screen Drawing | Full |
| Polygon Mode | Textured |
| Texture Windows | Enabled |
| VSync | Enabled |
| Banshee Code | Enabled |
| MDEC Format | Texture |
| Experimental Flipping | On |
| Experimental Screen Sizing | Off |
| FrontBuffer Rendering Fix | Off |
| FF7 TextureWindow Fix | On |
| DMAChain Fix | Long |
*-----------------------------*---------------------*

Here is a shot of the swirl effect..
 
#18 ·
Cajunspirit: they ARE trying to help you.

As for this - Show fps on start up/use FPs limit/Frame skippingff/Limit:200 - turn on use FPS limit and put the limit on either 60 or 50 (depending on whether you are using a NTSC or PAL version). If you're still having problems with the chocobo race, you could also try checking frame skip.
 
#21 ·
Ryos Listen....

What you called their with the frame stuff is EXACTLY what i'm currently using.After some trial and error I found that Pete's soft driver reneders that swirly effect PERFECTLY!only 1 problem everything except the swirlies look good!(MAJOR PROBLEMO AMIGO!)comprhende okay?okay!

Sincerely,
 
#22 ·
Originally posted by Cajunspirit
Why the sudden slowden in FF7 when in the chocobo racing area where you plac your bets?
Why won't Parasite Eve 2(US) start up?
This is new info.
Parasite Eve 2 now works with bleem 1.6b !!!
:doh:

hehe, other then a few :mg: glitches with the sound and graphics, it works fine.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top