Next Generation Emulation banner

epsxe 1.6.0 just always crashes under linux

3244 Views 10 Replies 6 Participants Last post by  Adwin
I just can't run anything on epsxe on my fedora core 4 box, even the launch bios fct doesn't work...

here is the console output, if someone can help me... thanks !

$ ./epsxe-1.60/epsxe
 * Running ePSXe emulator version 1.6.0.
 * Memory handlers init.
 * ePSXe: PSX BIOS loaded [/home/vince/epsxe-1.60/bios/scph1001.bin].
 * Init gpu[0][]
Error: couldn't get fbconfig
Missing ATI render-texture extension!NVIDIA Corporation
GeForce FX 5900XT/AGP/3DNOW!
 * Open gpu[0]
 * Init spu[0][]
 * Open spu[0]
Segmentation fault
1 - 1 of 11 Posts
Have you setup your gfx card to enable 3d?
I know when I first installed any linux distro 3d wasn't enabled (standard card drivers), had to download the drivers from the nvidia website and install via their shell program.
If you know 3d is enabled then ignore what i'm about to say.
Open up a shell console and type glxgears you'll then see another screen open with some gears spinning and it will tell you the fps etc. If its fast then 3d is on, if its going slow then try getting the latest drivers.

Also, do you have a tv connected or just using a monitor?
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.