Codebreaker .cbc file on pcsx2

logixs · February 2nd, 2010, 02:53

Hi, I'm sorry if this is already posted but I can't find an answer.

I have a codebreakerv10 iso that I use on pcsx2

???- I was wondering if it is possible to use a .cdc file from like codetwink because it would be much easier than manually entering codes??? If so how?

I tried putting it on a usb drive and going to media devices but it doesn't detect. I just started using pcsx2 because I built a new pc, so I'm not to knowledgeable in using pcsx2.
-thanks

xRyudo · February 2nd, 2010, 03:24

Pretty sure it needs to be an .elf file. The CodeBreaker I use is an .elf file that I can run off my Memory Card. (This is for the main program, not the .cbc files that you download from CodeTwink)

__________________
• PCSX2 Config:
• Version: PCSX2 r#### (Frequently Updated)• Resolution: Windowed @ 1280x720
• Render: Direct3D11 (Hardware) • D3D Internal Res: 1920x1080 • Aspect Ratio: 16:9 • Texture Filter: ON

• YouTube

logixs · February 2nd, 2010, 03:36

The codebreaker iso I use works for pscx2, but I don't want to manually enter codes because it'll take too long.
-Does the .elf file allow you to load the .cbc file.

logixs · February 4th, 2010, 18:03

anybody? help please???

redlofredlof · February 4th, 2010, 18:21

Quote:

Originally Posted by logixs

Hi, I'm sorry if this is already posted but I can't find an answer.

I have a codebreakerv10 iso that I use on pcsx2

???- I was wondering if it is possible to use a .cdc file from like codetwink because it would be much easier than manually entering codes??? If so how?

I tried putting it on a usb drive and going to media devices but it doesn't detect. I just started using pcsx2 because I built a new pc, so I'm not to knowledgeable in using pcsx2.
-thanks

that iso wont work with pcsx2. you need to make pnatch file to work with pcsx2.
check the link in my signature.

__________________

logixs · February 4th, 2010, 20:59

Quote:

Originally Posted by redlofredlof

that iso wont work with pcsx2. you need to make pnatch file to work with pcsx2.
check the link in my signature.

The codebreaker iso does work, I used it for games like GTA III.
-I just don't want to manually enter codes for games. It'd be easier to download the file with all the codes import it to codebreaker via device manager option in codebreaker.

xRyudo · February 5th, 2010, 00:31

Well you could always check the patch codes thread on these forums too. I'm sure someone made a .pnach file ready for use for GTA3, so all you'd have to do is copy that to your patches folder and you'd be done. It'd save you a lot of work instead of trying to get this CB to work.

__________________
• PCSX2 Config:
• Version: PCSX2 r#### (Frequently Updated)• Resolution: Windowed @ 1280x720
• Render: Direct3D11 (Hardware) • D3D Internal Res: 1920x1080 • Aspect Ratio: 16:9 • Texture Filter: ON

• YouTube

logixs · February 5th, 2010, 02:03

I could use a .pnach file for final fantasy xii, not Gta III. I use the codes on the codebreaker iso to play gta III, it works. Since codebreaker v10 doesn't have FFXII on its list (only up to FFX).
-if anyone could direct me to a good ffxii .pnach file that would be great too.

babidy · April 12th, 2012, 12:07

I have a problem too.
I tried many months to put the files .cbc into the CB, but when I plug it into my PC. Go into the menu of the device. Result is no flash drive. Only a memory.

babidy · April 12th, 2012, 12:09

***I use "cbcmaker" to create .cbc file.***

CheatMaster · April 12th, 2012, 13:20

pcsx2 don't support those devices.
If you want new cheats in Codebreaker,you have to add them the hard way...manually with the gamepad

__________________
P4 2.8GHz,6600GT,1024 RAM

GameFAQ Saves to PCSX2 Memory Card's using Mymc

babidy · April 12th, 2012, 15:18

well, thanks
Is it possible? that I make it on ps2 then copy save to use on pcsx2.

CheatMaster · April 12th, 2012, 22:06

If your ps2 don't have internal hdd connected to it(fat ps2 with network adapter and hdd),then if you can run homebrews like uLanchElLF,you can copy the CBP folder from the memory card as psu to your USB(after adding the codes and save them)and place the psu save into pcsx2 card by using mymc

And make sure you have at least 1.5mb free space on your PS2 card because CB saves the whole database into the memory card if you change it in any way(and it requires even more space if you are adding new codes)

__________________
P4 2.8GHz,6600GT,1024 RAM

GameFAQ Saves to PCSX2 Memory Card's using Mymc

Last edited by CheatMaster; April 12th, 2012 at 23:49..

makotech222 · April 13th, 2012, 00:05

upload that cbp folder

__________________

Desktop: [Windows 7 x64][Asus P8P67 Deluxe][Intel i5 2500k @4.4ghz][EVGA GTX 570][Corsair DDR3 8gb] [Corsair 550w][Viewsonic 23inch 120hz 1680x1050 Display]
Lenovo X200Tablet: [Windows 7 x64][L9400 @1.86ghz][Intel GMA 4500MHD][2gb Ram][160GB 7200rpm][LED-lit Touchscreen/pen-abled]

CheatMaster · April 13th, 2012, 01:52

Are you talking to me?
If yes,I can't(because I have internal hdd connected) but why do you need it.

If you just want the database(to do something to it)that is saved to the memory card after adding codes,you can get the same folder by doing the same on pcsx2

__________________
P4 2.8GHz,6600GT,1024 RAM

GameFAQ Saves to PCSX2 Memory Card's using Mymc

February 2nd, 2010, 02:53	#1
logixs Registered User Join Date: Mar 2009 Location: USA Posts: 5	Codebreaker .cbc file on pcsx2 Hi, I'm sorry if this is already posted but I can't find an answer. I have a codebreakerv10 iso that I use on pcsx2 ???- I was wondering if it is possible to use a .cdc file from like codetwink because it would be much easier than manually entering codes??? If so how? I tried putting it on a usb drive and going to media devices but it doesn't detect. I just started using pcsx2 because I built a new pc, so I'm not to knowledgeable in using pcsx2. -thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

February 2nd, 2010, 03:24	#2
xRyudo B.A.U. Join Date: Oct 2009 Location: Netherlands Posts: 586	Pretty sure it needs to be an .elf file. The CodeBreaker I use is an .elf file that I can run off my Memory Card. (This is for the main program, not the .cbc files that you download from CodeTwink) __________________ • PCSX2 Config: • Version: PCSX2 r#### (Frequently Updated)• Resolution: Windowed @ 1280x720 • Render: Direct3D11 (Hardware) • D3D Internal Res: 1920x1080 • Aspect Ratio: 16:9 • Texture Filter: ON • YouTube

February 2nd, 2010, 03:36	#3
logixs Registered User Join Date: Mar 2009 Location: USA Posts: 5	The codebreaker iso I use works for pscx2, but I don't want to manually enter codes because it'll take too long. -Does the .elf file allow you to load the .cbc file.

February 4th, 2010, 18:03	#4
logixs Registered User Join Date: Mar 2009 Location: USA Posts: 5	anybody? help please???

February 5th, 2010, 00:31	#7
xRyudo B.A.U. Join Date: Oct 2009 Location: Netherlands Posts: 586	Well you could always check the patch codes thread on these forums too. I'm sure someone made a .pnach file ready for use for GTA3, so all you'd have to do is copy that to your patches folder and you'd be done. It'd save you a lot of work instead of trying to get this CB to work. __________________ • PCSX2 Config: • Version: PCSX2 r#### (Frequently Updated)• Resolution: Windowed @ 1280x720 • Render: Direct3D11 (Hardware) • D3D Internal Res: 1920x1080 • Aspect Ratio: 16:9 • Texture Filter: ON • YouTube

February 5th, 2010, 02:03	#8
logixs Registered User Join Date: Mar 2009 Location: USA Posts: 5	I could use a .pnach file for final fantasy xii, not Gta III. I use the codes on the codebreaker iso to play gta III, it works. Since codebreaker v10 doesn't have FFXII on its list (only up to FFX). -if anyone could direct me to a good ffxii .pnach file that would be great too.

April 12th, 2012, 12:07	#9
babidy Registered User Join Date: Apr 2012 Location: Bankok Thailand Posts: 9	I have a problem too. I tried many months to put the files .cbc into the CB, but when I plug it into my PC. Go into the menu of the device. Result is no flash drive. Only a memory.

April 12th, 2012, 12:09	#10
babidy Registered User Join Date: Apr 2012 Location: Bankok Thailand Posts: 9	*I use "cbcmaker" to create .cbc file.*

April 12th, 2012, 13:20	#11
CheatMaster Registered User Join Date: Jan 2006 Posts: 2,438	pcsx2 don't support those devices. If you want new cheats in Codebreaker,you have to add them the hard way...manually with the gamepad __________________ P4 2.8GHz,6600GT,1024 RAM GameFAQ Saves to PCSX2 Memory Card's using Mymc

April 12th, 2012, 15:18	#12
babidy Registered User Join Date: Apr 2012 Location: Bankok Thailand Posts: 9	well, thanks Is it possible? that I make it on ps2 then copy save to use on pcsx2.

April 12th, 2012, 22:06	#13
CheatMaster Registered User Join Date: Jan 2006 Posts: 2,438	If your ps2 don't have internal hdd connected to it(fat ps2 with network adapter and hdd),then if you can run homebrews like uLanchElLF,you can copy the CBP folder from the memory card as psu to your USB(after adding the codes and save them)and place the psu save into pcsx2 card by using mymc And make sure you have at least 1.5mb free space on your PS2 card because CB saves the whole database into the memory card if you change it in any way(and it requires even more space if you are adding new codes) __________________ P4 2.8GHz,6600GT,1024 RAM GameFAQ Saves to PCSX2 Memory Card's using Mymc Last edited by CheatMaster; April 12th, 2012 at 23:49..

April 13th, 2012, 00:05	#14
makotech222 The one and only Join Date: Apr 2004 Location: Chicago Illinois Posts: 3,609	upload that cbp folder __________________ Desktop: [Windows 7 x64][Asus P8P67 Deluxe][Intel i5 2500k @4.4ghz][EVGA GTX 570][Corsair DDR3 8gb] [Corsair 550w][Viewsonic 23inch 120hz 1680x1050 Display] Lenovo X200Tablet: [Windows 7 x64][L9400 @1.86ghz][Intel GMA 4500MHD][2gb Ram][160GB 7200rpm][LED-lit Touchscreen/pen-abled]

April 13th, 2012, 01:52	#15
CheatMaster Registered User Join Date: Jan 2006 Posts: 2,438	Are you talking to me? If yes,I can't(because I have internal hdd connected) but why do you need it. If you just want the database(to do something to it)that is saved to the memory card after adding codes,you can get the same folder by doing the same on pcsx2 __________________ P4 2.8GHz,6600GT,1024 RAM GameFAQ Saves to PCSX2 Memory Card's using Mymc